Launch X431 Immo Pro
- Anti-theft password reading
- Key Matching
- Support anti-theft modules
Description
The Launch Immo Pro is a professional key and immobilizer programming tool with full diagnostic capabilities. It comes complete with the the Xprog 3. You can read and write data, program car keys, immobilizers, chips and works on anti-theft systems of engine and gearbox. It features 3 years free online updates
Intelligent Diagnostics
- Intelligent diagnostics includes read/clear DTCs, live data streaming, etc.
- Support CAN FD and DoIP* communication protocols.
- 15 advanced service functions.
- Pre-scan and post-scan diagnostic report.
- Wireless and wired diagnostic.
- One-stop Info Center includes vehicle repair information and latest updates.
- Support diagnostic history reviewing.
Processor | 2.0GHz, Quad-Core |
Operation System Android 10.0 | Android 10.0 |
Memory | 4GB |
Storage | 64GB |
Battery | 47.88Wh (7.6V,6300mAh) |
Display | 8′, 1280*800 |
Camera | Rear 8MP |
WIFI | 2.4GHz / 5GHz |
Interface | TYPE A *1 & TYPE C*1 |
Work Temperature | 0~50℃ |
Dimension | 234 x 166 x 39.5mm |
DBSCar VII | |
Working Voltage | DC 9 – 18V |
Working Temperature | 0~50℃ |
Communication | Bluetooth |
Dimension | 118.3 x 69.5 x 32 mm |
X-PROG3
Interface | DB26, DB15 |
Input Voltage | DC12V |
Input Current | 500mA |
Working Temperature | 0-50℃ |
Storage Temperature | -20-70℃ |
Vehicle Key Slot | To place car key for RF detection. |
DB26 | Used to connect to each anti-theft cables |
Infrared Slot For Benz Key | For Mercedes-Benz infrared key to perform the key matching |
Key IC Hole | Used to place the key chip to perform the key matching |
Status Indicator | Power supply indicator lamp |
DIY Slot | For anti-theft ECU pin through the cable to read and write data |
Locker | To tighten loose EEPROM board |
DC 12V | Used to connect to the DC12 power supply |
DB15 | To connect with vehicle’s DLC |
EEPROM Slot | To insert EEPROM board |
Advantages
- Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
- Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
- Supports ECU replacement for fifth-generation Audi (0AW/0B5) gearboxs.
- Supports reading, writing & cloning of the ECU for fourth-generation VW UDS engines.
- Supports BMW E chassis 8HP gearbox ECU program wiping.
- Support Mercedes (Engine, Gearbox, EIS) and BMW(Gearbox) ECU anti-theft data erase.
- Supports 170+ Bosch, 10+ Siemens engine ECU and 18+ gearbox ECU BENCH mode clone.
Bosch engine ECU: ME17,MED17,EDC17,MEVD17, etc.
Siemens engine ECU: BMW(MSV90, MSD87, MSD85,MSD81, MSD80), Mercedes(SIM271DE2.0,SIM271KE2.0), VW/Audi(SIMOS8.6x,SIMOS8.5x,SIMOS8.4x), etc.
Gearbox ECU: DQ200-MQB, DQ250XX, DL501 Gen1,VL381,VGS2- FCVT,VGS-FDCT,DQ400E,DL501 Gen2,DL382-7F,VGS2-FDCT,9G_Tronic,DQ380,DQ381, DQ500,AL551,AL450,AL552,AL951,8HPXX, etc.
Functions
Support anti-theft modules replacement of BMW, Mercedes-Benz, VW/Audi, Honda, Nissan, Hyundai, Kia, BYD, Changan, Wuling Baojun, GAC, SAIC Maxus, Great Wall Motor, Chery Car, Dongfeng Fengxing, JAC Passenger Car, etc
Anti-theft password reading
Supports the anti-theft password reading of Peugeot Citroen, GM, Nissan, Hyundai, Kia, Chery Cars, Dongfeng Fengxing, JAC Passenger Cars, etc.
Key Matching
Support key matching of Ford, GM, Mercedes-Benz, BMW, VW/Audi, Porsche, Peugeot Citroen, Land Rover Jaguar, Honda, Toyota, Nissan, Hyundai, Kia, BYD, Changan Automobile, Wuling Baojun, Great Wall Motors, Chery Cars, JAC Passenger Cars, etc.
Reviews
There are no reviews yet.