Digital battery tester BT1400
Add to Wishlist
Add to Wishlist
| Weight | 0.57 kg |
|---|---|
| Dimensions | 270 × 107 × 62 mm |
| Brand | Nordberg |
| Operating Temperature | 0 to 120 ‘F (-18 to 55 °C) |
| Voltage Range | 1.5-17 Volt DC |
| Display | LCD Displays |
| Housing Material | Acid / impact-resistant ABS |
| CCA scale | 100-1400 |
| Meter Range (Volt) | 7.6-17 DV |
| Battery Type (V) | 7.6~17 DV |
Be the first to review “Digital battery tester BT1400”
Description
Digital battery tester NORDBERG BT1400
Multifunctional Battery Conductance & Electrical System. Technology el Tester.
Advantages
- Expanded measurement range from 100 — 1400 CCA
- Text and graphics for fast decisions on starter & electrical system
- High/low voltage capture for improved starter/charging system
- Proven conductance technology and test algorithms required
- Accurate battery test decisions in seconds
- No user interpretation required
- Tests discharged batteries
- Voltmeter mode for testing both the starter and the charging system
- Shows available power in CCA’s at the end of each test
- Bad cell detection
- Printout customized information
Testing Out-of-Vehicle
- Clean the battery posts or side terminals with a wire brush. For testing side—post batteries, install and tighten the lead terminal stud adapters. Failure to properly install the stud adapters, or using stud adapters that are dirty or worn, may result in false test results. Do not use steel bolts.
Testing in-Vehicle
- Turn off the vehicle and all accessory loads. Testing with the ignition switch on or vehicle loads on may cause inaccurate readings. If the vehicle was running prior to testing, turn on the headlights for 30 seconds to remove the surface charge. Let the battery rest for 1 minute to recover before testing.
Applications
- Individual 12-volt automotive starting batteries
- 12-volt charging systems
Reviews
There are no reviews yet.